Cisco 6800 Series Administration Manual page 267

Phone Troubleshooting
General Purpose Parameters
Parameter
GPP A - GPP P
Regional
Call Progress Tones
Parameter
Dial Tone
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Description
The general purpose parameters GPP_* are used as
free string, registers when configuring the Cisco IP
phones to interact with a particular provisioning server
solution. They can be configured to contain diverse
values, including the following:
• Encryption keys
• URLs
• Multistage provisioning status information
• Post request templates
• Parameter name alias maps
• Partial string values, eventually combined into
complete parameter values
Default: Blank
Description
Prompts the user to enter a phone number.
Alternative to the Dial Tone. It prompts the user to
enter an external phone number, as opposed to an
internal extension. It is triggered by a, (comma)
character encountered in the dial plan.
Prompts the user to enter a call forwarding phone
number.
Played when a 486 RSC is received for an outbound
call.
Played when an outbound call has failed or after the
far end hangs up during an established call. Reorder
Tone is played automatically when <Dial Tone> or
any of its alternatives times out.
Played when the phone receiver has been off hook
after a period of time.
Played during an outbound call when the far end is
ringing.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
General Purpose Parameters
253