Configure Call Park On A Key Expansion Module Line - Cisco 6800 Series Administration Manual

Configure Call Park on a Key Expansion Module line

Procedure
Step 1
Select Voice > Att Console.
Step 2 Select a key expansion module line key on which to enable the speed dial.
Step 3
Enter a string in this format:
fnc=sd;ext=9999@$PROXY;vid=n;nme=xxxx
where:
• fnc= sd means function=speed dial
• ext= 9999 is the phone that the line key calls. Replace 9999 with numbers.
• vid=n is the line index of the phone.
• nme= XXXX is the name displayed on the phone for the speed-dial line key. Replace XXXX with a
You can also configure an XML service on key expansion module key. Enter the string in this format:
fnc=xml;url=http://xml.service.url;nme=name
Step 4 Click Submit All Changes.
Configure Call Park on a Key Expansion Module line
You can enable call park on a key expansion module line. The user can then use the line to park a call. and
then retrieve the call either from own phone or another phone.
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > Att Console.
Step 2
Select a key expansion module line key on which to enable the call park.
Step 3 Enter a string in this format:
fnc=prk;ext=9999@$PROXY;vid=n;nme=xxxx
where:
• fnc= prk means function=call park
• ext= 9999 is the phone that the line key calls. Replace 9999 with numbers.
• vid=n is the line index of the phone.
• nme= XXXX is the name displayed on the phone for the call park line key. Replace XXXX with a name.
You can also configure an XML service on key expansion module key. Enter the string in this format:
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
104
name.
Access the Phone Web Page, on page
Phone Accessories
92.