Cisco 6800 Series Administration Manual page 65

Phone Installation
Field
Security mode
Network name
User ID
Password
WEP Key
Passphrase
Frequency band
You can also configure Wi-Fi profile in the XML Configuration file in the format:
<!--
<Phone-wifi-on ua="rw">Yes</Phone-wifi-on>
<Phone-wifi-type ua="na">WLAN</Phone-wifi-type>
<!--
<!--
<Network_Name_1_ ua="rw">wipp</Network_Name_1_>
<Security_Mode_1_ ua="rw">Auto</Security_Mode_1_>
<!--
available options: Auto|EAP-FAST|PEAP-GTC|PEAP-MSCHAPV2|PSK|WEP|None
-->
<Wi-Fi_User_ID_1_ ua="rw"></Wi-Fi_User_ID_1_>
<!--
<Wi-Fi_Password_1_ ua="rw">*************</Wi-Fi_Password_1_>
-->
<!--
<!--
<Frequency_Band_1_ ua="rw">Auto</Frequency_Band_1_>
<!--
Field Type or
Choices
Auto
EAP-FAST
PEP-GCT
PEAP-MSCHAPV2
PSK
WEP
None
• Auto
• 2.4 GHz
• 5 GHz
Wi-Fi Settings -->
available options: WLAN|WPS
Wi-Fi Profile 1 -->
<WEP_Key_1_ ua="rw"/>
<PSK_Passphrase_1_ ua="rw"/>
available options: Auto|2.4 GHz|5 GHz
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Set Up a Wi-Fi Profile from the Phone Web Page and the XML Provisioning Server
Default Description
None Allows you to select the type of authentication that
the phone uses to access the WLAN.
The security mode depends on the settings on your
access point.
Allows you to enter a unique name for the Wi-Fi
profile. This name displays on the phone.
Allows you to enter a user ID for the network
profile.
Allows you to enter password for the network
profile that you create. The type of password
depends on the security mode that you have
selected.
• Password: Security mode is Auto.
• Passphrase: Security mode is PSK.
• WEP Key: Security mode is WEP.
Auto Allows you to select the wireless signal standard
that the WLAN uses.
-->
-->
-->
-->
51