Cisco 6800 Series Administration Manual page 315

Phone Troubleshooting
Parameter
ACS Password
ACS URL In Use
Connection Request URL
Connection Request Username
Connection Request Password
Periodic Inform Interval
Periodic Inform Enable
TR-069 Traceability
CWMP V1.2 Support
TR-069 VoiceObject Init
TR-069 DHCPOption Init
TR-069 Fallback Support
BACKUP ACS URL
BACKUP ACS User
BACKUP ACS Password
Description
Password to access to the ACS for a specific user. This password is used
only for HTTP-based authentication of the CPE.
If the password is not configured, admin is used as default.
URL of the ACS that is currently in use. This is a read-only field.
URL of the ACS that makes the connection request to the CPE.
Username that authenticates the ACS that makes the connection request
to the CPE.
Password used to authenticate the ACS that makes a connection request
to the CPE.
Duration in seconds of the interval between CPE attempts to connect to
the ACS when Periodic Inform Enable is set to yes.
Default value is 20 seconds.
Settings that enables or disables the CPE connection requests. Default
value is Yes.
Settings that enables or disables TR-069 transaction logs.
The default value is No.
Settings that enables or disables CPE WAN Management Protocol
(CWMP) support. If set to disable, the phone does not send any Inform
messages to the ACS nor accept any connection requests from the ACS.
Default value is Yes.
Settings to modify voice objects. Select Yes to initialize all voice objects
to factory default values or select No to retain the current values.
Settings to modify DHCP settings. Select Yes to initialize the DHCP
settings from the ACS or select No to retain the current DHCP settings.
Settings that enables or disables the TR-069 fallback support.
If the phone attempts to discover the ACS with DHCP and is
unsuccessful, the phone next uses DNS to resolve the ACS IP address.
Backup URL of the ACS that uses the CPE WAN Management Protocol.
This parameter must be in the form of a valid HTTP or HTTPS URL.
The host portion of this URL is used by the CPE to validate the ACS
certificate when it uses SSL or TLS.
Backup username that authenticates the CPE to the ACS when ACS
uses the CPE WAN Management Protocol. This username is used only
for HTTP-based authentication of the CPE.
Backup password to access to the ACS for a specific user. This password
is used only for HTTP-based authentication of the CPE.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
TR-069
301