Names And Functions Of Each Part Of The Emulator - Renesas R0E436640CPE00 User Manual

R0E436640CPE00 User's Manual
(4) User system
This is your application system.
This product can be used when not connecting the user system.
(5) Power supply for the user system
This is a power supply for the user system. As this emulator cannot supply the power to the user system, supply the power
to the user system separately from the emulator.
(6) Host machine
This is a personal computer for controlling the emulator.
(7) Pitch converter board such as R0E436640CFG20
This is a pitch converter board for connecting to an MCU foot pattern on the user system. For details, refer to "2.8
Connecting the User System" (page 31).

1.2.2 Names and Functions of each part of the Emulator

Figure 1.2 shows the names of the LEDs on the upper panel of the emulator.
System status LEDs
LED1: Emulator power (POWER)
LED2: Emulator startup (SAFE)
Target status LEDs
LED3: User system power (POWER)
LED4: Clock oscillation (CLOCK)
LED5: MCU RESET pin (RESET)
LED6: Program execution (RUN)
Figure 1.2 Names of the LEDs on the upper panel of the R0E436640CPE00
(1) System Status LEDs
The system status LEDs indicate the emulator's power supply, and operating status, etc. Table 1.2 lists the definition of each
system status LED.
Table 1.2 Definitions of the system status LEDs
Name Number Color
POWER LED1 Orange
SAFE LED2 Green
REJ10J0918-0300 Rev.3.00 February 15, 2007
LED1 SYSTEM
POWER
POWER
STATUS
SAFE
SAFE
LED2
COMPACT EMULATOR
R0E436640CPE00
LED3 POWER
POWER
TARGET
CLOCK
CLOCK
STATUS
RESET
RESET
RUN
RUN
LED6
COMPACT EMULATOR MADE IN JAPAN
Status
ON Power is supplied to the emulator.
OFF Power is not supplied to the emulator.
ON Emulator system has started normally.
OFF Emulator system has not started normally.
J1: Power connector
J2: USB interface connector
POWER USB
5.0V
SW
1
- +
5.0V
JP2
3.3V
EXT
JP1
INT
MADE
Meaning
1. Outline
System reset switch
JP2: MCU power supply voltage selection jumper
(factory-setting: 5.0 V)
JP1: MCU power supply source selection jumper
(factory-setting: INT)
Page 16 of 102