Installing The Included Software; Attaching The Ferrite Core - Renesas R0E436640CPE00 User Manual

R0E436640CPE00 User's Manual 2. Setup

2.2 Installing the Included Software

If the OS used in your host machine is Windows XP or 2000, this installation must be executed by a user with administrator
rights. Be aware that users without administrator rights cannot complete the installation.
The "auto_run.exe" starts up by inserting the included CD into the CD-ROM drive, and the HTML page for installation will
open. Install the C compiler, emulator debugger and USB driver as occasion demands.
In process of installation, "user information" dialog box to enter the user information (contractor, section, contact address, and
host machine) will open. The supplied information will be turned into a format by which technical support will be provided by
e-mail.

2.3 Attaching the Ferrite Core

Attach the ferrite core included with this product close to the DC plug of the power cable. Without the ferrite core it may cause
interference.
The power cable should be wound around the ferrite core as shown in the figure, and close the ferrite core until it clicks.
Figure 2.2 Attaching the ferrite core
REJ10J0918-0300 Rev.3.00 February 15, 2007 Page 22 of 102