Table of Contents
Advertisement
R0E436640CPE00 User's Manual
1. Outline
(6) MCU Power Supply Source Selection Jumper (JP1)
This is a jumper switch to set the power supply source to the MCU. For details on this switch, see "2.6.1 MCU Power Supply
Source Selection Jumper/MCU Power Supply Voltage Selection Jumper" (page 25).
(7) MCU Power Supply Voltage Selection Jumper (JP2)
This is a jumper switch to set the power supply voltage of the MCU. This setting is valid when the MCU power supply source
selection jumper is set to INT only. For details on this switch, see "2.6.1 MCU Power Supply Source Selection Jumper/MCU
Power Supply Voltage Selection Jumper" (page 25).
REJ10J0918-0300 Rev.3.00 February 15, 2007
Page 18 of 102
Advertisement
Table of Contents
