Name Of Each Part Of The Emulator - Renesas M306K9T2-CPE User Manual

(2) Name of Each Part of the Emulator

Figure 2.2 shows the name of each part of the emulator.
System status LED
LED1: Emulator power (POWER)
LED2: Emulator startup (SAFE)
Target status LED
LED3: Target system power (POWER)
LED4: Clock oscillation (CLOCK)
LED5: MCU RESET pin (RESET)
LED6: Program execution (RUN)
Figure 2.2 Name of each part of the emulator (upper side of the M306K9T2-CPE)
(1) System status LEDs
The system status LEDs indicate the emulator main unit's power supply. Table 2.1 lists the
definition of system status LED.
Table 2.1 Definition of system status LEDs
Name Number
POWER LED1
LED2
SAFE
(2) Target status LEDs
The target status LEDs indicate the target MCU's power supply and operating status. Table 2.2
lists the definition of each target status LEDs.
Table 2.2 Definition of target status LEDs
Name Number
POWER LED3
CLOCK LED4
RESET LED5
RUN LED6
LED1
POWER
SAFE LED2
LED3
POWER
CLOCK
RESET
RUN
LED6
COMPACT EMULATOR MADE
Color Status
Orange ON
OFF
Green ON
OFF
Color Status
Orange ON
OFF
Green ON
OFF
Red ON
OFF
Green ON
OFF
( 17 / 56 )
J1: Connector (Power)
J2: Connector (USB cable)
SW1
System reset switch
JP1: Jumper for selecting MCU power source
(Factory-setting: INT)
Function
Power is supplied to the emulator.
Power is not supplied to the emulator.
Emulator system has started normally.
Emulator system has not started normally.
Function
Power is supplied to the target MCU.
Power is not supplied to the target MCU.
BCLK is output from the target MCU.
BCLK is not output from the target MCU.
Target MCU is being reset.
Target MCU is not being reset.
User program is being executed.
User program is not being executed.