Renesas R0E436640CPE00 User Manual page 47

R0E436640CPE00 User's Manual
(2) Program execution
1) Resetting the user program
2) Executing the user program (Go)
3) Executing the user program (Go Free)
4) Executing the user program (Reset Go)
5) Step execution of the user program
REJ10J0918-0300 Rev.3.00 February 15, 2007
3. Usage (Emulator Debugger)
CPU reset
Resets the program.
Or you can select "CPU Reset" from "Debug" menu for the
same effect.
Go
Runs the program beginning with the current PC position.
Or you can select "Run" from "Debug" menu for the same
effect.
Go Free
Runs the program beginning with the current PC position.
The software and hardware breaks set in it are ignored.
Reset Go
Runs the program after reset.
Or you can select "Reset Go" from "Debug" menu for the
same effect.
Step In
Single-steps the program executing
(including those in functions).
Step Over
Single-steps the program executing each function call as one
step.
Step Out
Exists a function and stops at a statement in the program
next to the one that called the function.
Or you can select "Step In" or other corresponding
commands from "Debug" menu for the same effect.
each statement
Page 47 of 102