M38000Tl2-Psw (Reset, Gnd And Vcc Cables With Overcurrent Protective Circuits); Functions Of Each Part Of The M38000Tl2-Psw - Renesas M38000TL2-FPD User Manual

3.6 M38000TL2-PSW (RESET, GND and Vcc Cables with Overcurrent Protective Circuits)

The M38000TL2-PSW is an upgraded version of the RESET, GND and Vcc cables with protective
circuits added for prevention of possible damage to the M38000TL2-FPD in case the cables are
improperly connected.

(1) Functions of Each Part of the M38000TL2-PSW

Here following explains the function of each part of the M38000TL2-PSW.
Figure 3.8 External view of the M38000TL2-PSW
(1) M38000TL2-PSW main unit
(2) Connector for the emulation pod
(3) Clips for connecting RESET, GND and Vcc
(4) LED
Prevents the M38000TL2-FPD from getting damaged when the reset, GND, and Vcc cables are
erroneously connected.
This is a 3-pole connector used to connect the M38000TL2-PSW and M38000TL2-FPD.
These clips connect to the RESET input, Vcc, and GND pins on the target system. They consist
of RESET (white), Vcc (yellow), and GND (black).
Turns off to alert you when Vcc and GND are shorted. For details, refer to "3.6 (4) LED Display"
(page 30).
( 27 / 54 )