Renesas R0E436640CPE00 User Manual page 59

R0E436640CPE00 User's Manual
(3) Trace point setup window
1) Opening the trace point setup window
2) Trace Point Setting Window in initial state
REJ10J0918-0300 Rev.3.00 February 15, 2007
3. Usage (Emulator Debugger)
Trace Point
Clicking this toolbar button opens the trace point setting
window.
Or you can select "Trace" from "Trace" of "View" menu for
the same effect.
Trace Point Setting Window in initial state
Be sure to enable the trace point function in the Init dialog
box before you set up in this window. Here, you can set
events in the same way as for the hardware breakpoints.
Page 59 of 102