Names And Functions Of Each Part Of The Emulator - Renesas Compact Emulator M34571T2-CPE User Manual

M34571T2-CPE User's Manual

1.2.2 Names and Functions of each part of the Emulator

Figure 1.2 shows the names of the LEDs on the upper panel of the emulator.
J2: USB interface connector
J1: Power connector
System status LEDs
LED1: Emulator power (POWER)
LED2: Emulator status (SAFE)
Figure 1.2 Names of the LEDs on the upper panel of the M34571T2-CPE
(1) System Status LEDs
The system status LEDs indicate the emulator main unit's operating status etc. Table 1.2 lists the definition of the system status
LEDs.
Table 1.2 Definitions of the system status LEDs
Name Number Color
POWER LED1 Orange
SAFE LED2 Green
(2) Target Status LEDs
The target status LEDs indicate the target MCU's power supply and operating status. Table 1.3 lists the definition of each
target status LED.
Table 1.3 Definitions of the target status LEDs
Name Number Color
POWER LED3 Orange
CLOCK LED4 Green
RESET LED5
RUN LED6 Green
REJ10J0972-0100 Rev.1.00 February 10, 2006
JP1, JP2
Not used for this system
System reset switch
(always open)
2 J P
1 J P
5.0V E X T I N T
3.3V
Target status LEDs
LED3: User system power (POWER)
LED4: Clock oscillation (CLOCK)
LED5: MCU RESET status (RESET)
LED6: Program execution (RUN)
Status
ON Power is supplied to the emulator.
OFF Power is not supplied to the emulator.
ON Emulator system has started normally.
OFF Emulator system has not started normally.
Status
ON Power is supplied to the target MCU.
OFF Power is not supplied to the target MCU.
ON Clock is supplied to the target MCU.
OFF Clock is not supplied to the target MCU.
Red ON Target MCU is being reset.
OFF Target MCU is not being reset.
ON User program is being executed.
OFF User program is not being executed.
Check pins
TP1: VDD2
POF status LED
TP2: GND
MCU power supply voltage selection switch
TP3: WRST
4 L E D 5 L E D
M34571T2-CPEB REV.A
J3: Connector for user system
Meaning
Meaning
J4: External trace cable connector
J4
1. Outline
Page 16 of 72