Usage (Emulator Debugger); Starting Up The Emulator Debugger - Renesas R0E436640CPE00 User Manual

R0E436640CPE00 User's Manual

3. Usage (Emulator Debugger)

3. Usage (Emulator Debugger)
This chapter describes how to start up the emulator debugger from the High-performance Embedded Workshop.

3.1 Starting Up the Emulator Debugger

When debugging the completed programs, switch the session. The session can be changed by the drop down list of the tool bar
shown below.
You will have as many sessions created as the number of targets you selected when creating a project, so select the session that
corresponds to the target to be connected from the drop-down list. To connect to the H8/300H Tiny Compact Emulator, select
"H8/300H Tiny Compact Emulator."
REJ10J0918-0300 Rev.3.00 February 15, 2007 Page 40 of 102