Names And Functions Of Each Part Of The Emulator - Renesas R0E00030AKCT00 User Manual

E30A Emulator User's Manual

1.7 Names and Functions of Each Part of the Emulator

Figure 1.2 shows the names and functions of each part of the emulator. The connector followed by "*" (the differential
connector) is prepared for future expansion. It cannot be used because of not working now.
DC power input
connector
Power switch
USB I/F
connector
Maintenance
Figure 1.2 Names and functions of each part of the emulator
1.7.1 System Status LEDs
The system status LEDs indicate the emulator main unit's operating status. Tables 1.4 and 1.5 list the definition of the system
status LEDs.
Table 1.4 Definitions of the system status LEDs (SYS POWER)
Name/Status
SYS POWER
(Orange)
OFF
Table 1.5 Definitions of the system status LEDs (SAFE and ERROR)
Name/Status
SAFE (Green) ERROR (Red)
ON OFF
ON Blinking
Blinking OFF
OFF
OFF Blinking
1.7.2 Target Status LED
The target status LED indicates the target MCU's operating status. Table 1.6 lists the definition of the target status LED.
Table 1.6 Definitions of the target status LED
Name/Status
RUN
(Green)
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
System status
switch LEDs
ON Power is supplied to the emulator.
Power is not supplied to the emulator.
Emulator system has started normally.
Firmware is being downloaded.
Emulator is in maintenance mode.
ON Emulator system is not operating normally.
Firmware download is not operating normally.
ON User program is being executed.
OFF User program is not being executed.
Target status LED
Meaning
Meaning
Meaning
1. Outline
Option
connector
50Ω coaxial
connector
Differential
connector *
Page 17 of 65