Table of Contents
Advertisement
R0E436640CPE00 User's Manual
2. Setup
This chapter describes the preparation for using this product, the procedure for starting up the emulator and how to change
settings.
2.1 Flowchart of Starting Up the Emulator
The procedure for starting up the emulator is shown in Figure 2.1. For details, refer to each section hereafter. And, when the
emulator does not start up normally, refer to "5. Troubleshooting" (page 95).
Check the package components.
User registration
Install or upgrade the C compiler and
emulator debugger.
Set the MCU power voltage
selection jumper (JP2).
Connect the USB interface cable.
Connect the power supply for the emulator.
Connect the user system.
Turning on the power supply.
Check the LED display of the emulator.
Start up the emulator debugger from the
High-performance Embedded Workshop.
Set the operating environment
of the emulator debugger.
Debug a program with various functions of
the emulator debugger.
Figure 2.1 Flowchart of starting up the emulator
REJ10J0918-0300 Rev.3.00 February 15, 2007
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
Refer to "1.1 Package Components" (page 14).
Refer to "User Registration" (page 12).
Install it from the included CD-ROM.
Select a power voltage supplied to the target MCU.
Connect the USB interface cable to the USB interface connector
(J2) of the emulator and the USB port of the host machine.
Connect a power supply to the power connector (J1). Power supply
should be 5.0 V ±5%, 2 A.
Connect the user system as occasion demands.
Turn on the power to the emulator and the user system as
simultaneously as possible.
Check that the system status LED, and POWER and RESET of
target status LED are lighting. When the user system is not
connected, the POWER LED does not light up.
Start up the High-performance Embedded Workshop and the
emulator debugger.
Set the INIT dialog box and MCU Setting dialog box of the
emulator debugger.
For how to use the emulator debugger, refer to the online manual of
the
High-performance
debugger.
Embedded
Workshop
2. Setup
and
emulator
Page 21 of 102
Advertisement
Table of Contents
