Renesas R0E436640CPE00 User Manual page 49

R0E436640CPE00 User's Manual
(3) Setting software break points
1) Screen after software breakpoint setup
S/W break point column
REJ10J0918-0300 Rev.3.00 February 15, 2007
3. Usage (Emulator Debugger)
Screen after software break point setup
- Software break point (B)
A software break point can be set or cleared by double-
clicking the break point display area.
This is rewritten to a break instruction, and program
execution starts.
Or you can select "S/W Break Points" button of the tool bar,
or select "S/W Break Points" from "Break" of "View" menu
for the same effect.
Page 49 of 102