Renesas R0E436640CPE00 User Manual page 55

R0E436640CPE00 User's Manual
(4) Setting the combinatorial event condition for the hardware break point
1) Window for setting the combinatorial event condition
REJ10J0918-0300 Rev.3.00 February 15, 2007
3. Usage (Emulator Debugger)
Setting the combinatorial event condition
There are following three conditions that you can choose for
the combinatorial events.
- OR
The program breaks when one of the specified events
occurs.
- AND
The program breaks when all of the specified events
occur.
- AND (Same Time)
The program breaks when the specified events occur at
the same time.
When you have finished setting the combinatorial event
condition, click the "Set" button.
Page 55 of 102