Adjusting The Clutch; Rear Plate - Husqvarna RB150 Workshop Manual

Adjusting the clutch

1. Inspect the clearance of the clutch pedal. The
clearance is to be about 1 cm.
2. To adjust the clearance, loosen the locknut (4)
and adjusting nut (5) on the screw (3).
3. Hold the screw (3) with a screwdriver while
turning the adjusting nut (5) to give the correct
clearance. (See item 1.)
4. Secure the adjusting nut (5) with the locknut (4).

Rear plate

Mounting
1. Connect the cables to the microswitch (3), insert
the grass discharge chute and fit the rear plate.
2. Fit the eight screws (2).
3. Fit the six screws (1).
POWER TRANSMISSION
3
2
1
2
E
4 5
3 1
2
English – 71