Technical Data - Husqvarna RB150 Workshop Manual

Applies to RB 150, 1996 and 1997 models
• Engine
• Battery
• Front tyres
• Rear tyres
• Transverse axle
• Speed
• Turning radius
• Mowing height
• Size of cutting unit
• Blade engagement
• Discharge
• Air filter
• Fuel filter
• Oil filter
• Cutting unit
• Petrol
• Engine oil
• Weight
• Size of the tractor
NOTE
* Always state the model and type number when purchasing spare parts.
In order to make improvements, the specifications and design are subject to alteration without notice.
Please note that no legal claims whatsoever can be made with the support of information contained in this
manual.
Use only genuine spare parts for repairs. The guarantee becomes null and void if other parts are used.

TECHNICAL DATA

15.5 HP Diamond Plus Briggs & Stratton*
12 Volt / 22 Ah
Size: 15 x 6.00 – 6
Tyre pressure: 100 kPa (1 bar)
Size: 18 x 8.50 – 8
Tyre pressure: 70 kPa (0.7 bar)
Dana-Spicer; 6 gears forward and one reverse
Forward: 0–9 km/h
Reverse: 0–4 km/h
0.7 metre
6 mowing heights between 25 mm and 90 mm
Twin cutting blades; 102 cm
Warner electromagnetic clutch
To the rear, with grass collector as standard
Briggs & Stratton air filter for engine: 15.5 HP Diamond Plus Briggs & Stratton
Briggs & Stratton fuel filter for engine: 15.5 HP Diamond Plus Briggs & Stratton
Briggs & Stratton oil filter for engine: 15.5 HP Diamond Plus Briggs & Stratton
Suspended
Use leaded or unleaded quality petrol. Recommended lowest octane number is
95.
SAE 30 or SAE 10W/30 is to be used when topping up or changing the oil.
With cutting unit and grass collector: 256 kg
Without cutting unit and grass collector: 241 kg
(LxWxH) 240 x 106 x 110 cm
E
English – 5