Fitting The Fuel Hose; Connecting Electric Cables To The Engine; Fitting The Engine Hood - Husqvarna RB150 Workshop Manual

E

Fitting the fuel hose

1. Remove the protective tape from the carburettor
fuel port and the end of the fuel hose.
2. Push the fuel hose (9) on the fuel port of the
carburettor.
3. To open the flow of fuel, set the fuel cock (8)
parallel with the fuel hose.

Connecting electric cables to the engine

1. Connect the cables (7) to the rectifier.
2. Connect cable (6) to the starter motor.
3. Connect the earthing cable (5).

Fitting the engine hood

1. Align the hood hooks over the fitting.
2. Move the hood down so that the hooks engage
properly.
3. Move the hood forward, making certain that it
stops in the forward position.
4. Move the hood backwards.
60 – English
ENGINE
5
9
6 7
8