Scope Of Delivery And Accessories; Preparation For Use - Otto Bock DynamicArm 12K100N Instructions For Use Manual

NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents.
► Only clean the product with a damp cloth and mild soap (e.g. 453H10=1-N Ottobock DermaClean).
INFORMATION
► The electrodes are to be placed on intact skin only and with as much electrode-skin contact as possible.
► In case of strong interference from electronic devices, the position of the electrodes should be checked and
changed if necessary.
► If interference cannot be eliminated, please contact the Ottobock branch responsible for your country.
► Allow the patient to rest during the adjustment of the electrodes. Muscle fatigue leads to inconsistent results,
and therefore the therapist will tend to establish electrode settings that are excessively sensitive.

5 Scope of Delivery and Accessories

• 1 pc. 12K100N=* DynamicArm
• 1 pc. cable lock
• 1 pc. cable guide
• 4 pcs. oval head self-tapping screw
• 1 pc. electric wrist rotator dummy
• 1 pc. 757L24 battery charger with EU and US plug
• 1 pc. 10S1=40 lamination ring
• 1 pc. hook
• 1 pc. Lamination protection cover (hollow ball)
• 1 pc. Lamination protection cover (disc with arrow)
• 1 pc. O-ring
• 1 pc. clamp ring
• 4 pcs. mounting brackets

6 Preparation for use

6.1 Shortening the forearm
INFORMATION
Wrap the elbow area with plastic wrap to prevent swarf from entering it during cutting.
6.1.1 Forearm length and intended use of the 10S17 electric wrist rotator
INFORMATION
Please note that the minimum forearm length is 213 mm when using an electric wrist rotator and 187 mm without
an electric wrist rotator.
The forearm length is measured from the distal end of the lamination ring to the middle of the elbow axle.
DynamicArm forearm length
305–213 mm
212–187 mm
6.1.2 Cutting to length
NOTICE
Do not pull the foam or cable protector cap out of the forearm under any circumstances before the forearm is cut
to length and before the lamination ring is glued in! Doing so will reduce the useable portion of the forearm!
If the cables were pulled out anyway, they have to be pushed back into the forearm and secured with the foam disc
before performing further work. The cables take up more space in the forearm as a result.
DynamicArm 12K100N
• 1 pc. foam cover
• 1 pc. 647G152 instructions for use (qualified per­
sonnel)
• 1 pc. 646D229 instructions for use (user)
• 1 pc. 646T333 instructions for use (qualified per­
sonnel)
• 1 pc. 646D644 service pass
Accessories
• 1 pc. strap clamp for UNI
• 2 pcs. 2.2x6.5 sheet metal cap screw
• 1 pc. EURO power cord
• 1 pc. USA power cord
10S17 Electric wrist rotator
possible
not possible
Scope of Delivery and Accessories
9