Otto Bock DynamicArm 12K100N Instructions For Use Manual page 12

Preparation for use
For forearm lengths from 225 mm to 213 mm with 10S17 electric wrist rotator
For forearm lengths from 225 mm to 187 mm without 10S17 electric wrist rotator
12
5) Using a paintbrush, apply the resin in a wedge
shape to the marked area of the inside forearm and
the outside of the lamination ring.
6) Insert the lamination ring and lamination ring cover.
The lamination ring must be flush with the socket!
Let the adhesive joint harden.
INFORMATION: Measure the forearm length.
► Make sure the 10S17 electric wrist rotator dummy
is pushed over the cable protector cap. This
ensures correct axial alignment of the lamination
ring.
1) Pull the 10S17 electric wrist rotator dummy back
and out of the lamination ring. The lamination ring
cover has to remain in the lamination ring.
DynamicArm 12K100N