Planmeca ProMax 3D s User Manual page 81

12.2.3 Licences (2300)
12.2.4 Reset to Factory Defaults (2500)
User's Manual (3D Imaging)
• To activate a program licence:
1. Select Program > 2300 Licences.
2. Select the licence you wish to activate.
3. Enter the licence code that you have received for this
licence on this X-ray unit.
4. Select the green check mark button.
5. Repeat for an other program licence if needed.
6. Select the green check mark button.
• To reset to factory defaults:
1. Select Program > 2500 Reset to Factory Defaults.
The function will restore the exposure values that
have been preset at the factory (i.e. overrule your
own settings in menu Programs (2100)).
The preset exposure values for 3D patient exposures
are shown in section 9.5.3 "Adjusting exposure
values for current exposure" on page 39 and for 3D
model exposures in section 11.1.2 "Selecting
settings" on page 57.
Planmeca ProMax 3D s & 3D Classic
12 SETTINGS
77