Planmeca ProMax 3D s User Manual page 40

9 3D PATIENT EXPOSURE
9.3.6 Selecting jaw side
9.3.7 Reducing diameter of adjoining volume(s) (3D Double / Triple Scan only)
36 Planmeca ProMax 3D s & 3D Classic
Use this button to select the jaw side (right / left / both
sides) that you wish to expose.
NOTE
The available options depend on the selected program
and image resolution.
In 3D Double Scan and 3D Triple Scan programs all
image volumes have the same diameter by default.
Use this button if you wish to reduce the diameter of the
adjoining image volume(s).
NOTE
All image volumes are the same height.
User's Manual (3D Imaging)