User's Manual (3D Imaging)
•
To control audio settings:
1.
Select User > 1300 Operational Settings > 1320
Audio Settings.
2.
Select
•
Alarm Volume
This setting adjusts the volume of the radiation
warning tone. Use the minus or plus button to
reduce or increase the volume.
•
Touch Volume
This setting adjusts the volume of the audible
signal that you hear when you make a selection
on the touch screen. Use the minus or plus
button to reduce or increase the volume. Set the
volume level to 0% if you do not wish to use this
function.
3.
Select the green check mark button.
Planmeca ProMax 3D s & 3D Classic
12 SETTINGS
69