Planmeca ProMax 3D s User Manual page 23

User's Manual (3D Imaging)
• Scrolling lists:
To scroll a list down or up, slide your finger on the
touch screen.
• Checking patient's name and ID number:
The patient's name and ID number are shown in the
top right corner of the touch screen. The patient and
exposure mode have to be selected in Planmeca
Romexis.
• Checking DAP and CTDI values:
The estimated values for DAP (Dose Area Product)
and CTDI (Computed Tomography Dose Index) are
shown with black text on the touch screen before you
take an exposure. The actual values are shown with
green text after the exposure.
• Changing settings:
To change a setting, select the settings symbol on
the main screen. This takes you to the settings menu
where you can adjust the settings of the X-ray unit.
Refer to section 12 "SETTINGS" on page 65 for
details.
• About stand-by mode:
The touch screen will automatically switch to stand-
by mode if you do not touch the screen or the
exposure button for more than thirty minutes. In
stand-by mode the green light on the on / off switch
indicates that the X-ray unit is switched on even
though the screen is dark. The screen will switch on
as soon as you touch it again.
• Selecting demo mode:
You can switch demo mode on if you wish to practice
or demonstrate the functions of the X-ray unit without
radiation and PC connection. To do this, select
Settings > User > 1300 Operational settings > 1310
Use Mode > 1311 Set Demo Mode. The selection is
shown in the bottom left corner of the touch screen.
Planmeca ProMax 3D s & 3D Classic
6 MAIN PARTS
19