Head support B: Attaching head band
9.1.3 Adjusting adapter height
User's Manual (3D Imaging)
If you are using the head band, attach it to the support
bars as shown. The side with the large openings should
be against the patient's forehead.
The adjustable adapter has five height positions. The
patient's head has to be positioned at the correct height
by lowering or raising the adapter as follows. The lower
the patient is positioned, the higher the image position will
be.
Use these patient supports.
Planmeca ProMax 3D s & 3D Classic
9 3D PATIENT EXPOSURE
29