Planmeca ProMax 3D s User Manual page 74

12 SETTINGS
70 Planmeca ProMax 3D s & 3D Classic
• To manage settings for patient positioning:
1. Select User > 1300 Operational Settings > 1330
Patient Positioning.
2. Turn an option(s) ON or OFF:
• Side Entry
Turn this option OFF if you do not wish to use the
open (full view) patient entry position. This might
be necessary if there is no space for the C-arm
to move back.
• Midsagittal and Frankfort Lights in Tomo
Turn this option ON if you wish to use the
midsagittal and Frankfort plane lights when you
take 2D tomographic or 3D exposures.
• Temple Supports
Turn this option OFF if you do not wish to use the
temple supports.
• Return C-arm Automatically
Turn this option ON if you wish to set the X-ray
unit so that the C-arm will automatically return to
the starting position at the end of an exposure
cycle. Note, however, that the automatic function
works only if the exposure button is pressed and
held down for the entire duration of the
exposure.
3. Select the green check mark button.
User's Manual (3D Imaging)