Planmeca ProMax 3D s User Manual page 39

9.3.4 Selecting volume height
9.3.5 Selecting volume position
User's Manual (3D Imaging)
Use this button to select the height of the image volume
(full, lower or upper height).
NOTE
The available options depend on the selected program.
Touch the area that you wish to expose. Alternatively,
select the volume position from the drop-down menu at
the top.
NOTE
The available options depend on the selected program.
NOTE
In 3D Double Scan and 3D Triple Scan programs the
selected area is the primary image volume. The other
image volume(s) adjoin(s) the primary image volume.
Planmeca ProMax 3D s & 3D Classic
9 3D PATIENT EXPOSURE
35