9.1.2 Attaching head support
Attaching support bars
Head support A: Attaching adjustable head support
User's Manual (3D Imaging)
NOTE
The available head supports are shown in section 6.5.1
"Head supports (A or B)" on page 14.
Insert the support bars into the holes in the patient
support table and secure them in position by tightening
the locking knobs.
NOTE
Ensure that you insert the support bars the right way
round.
If you are using the adjustable head support, slide it onto
the support bars.
Planmeca ProMax 3D s & 3D Classic
9 3D PATIENT EXPOSURE
27