Planmeca ProMax 3D s User Manual page 22

6 MAIN PARTS
18 Planmeca ProMax 3D s & 3D Classic
• Making selections:
To make a selection on the touch screen, simply
touch a button or a field with your finger or a soft
stylus. The selected option is highlighted. To deselect
an option, touch the button or field again (or select an
other option if available).
You hear an audible signal when you make a
selection. If you wish to adjust the volume of the
signal, select Settings > User > 1300 Operational
Settings > 1320 Audio Settings > Touch Volume.
NOTE
Do not use sharp objects to operate the touch screen.
• Accept button:
To accept a selection, select the green check mark
button.
• Cancel button:
To cancel a selection and close the screen, select the
red cross button.
• Pause button:
To pause a function (instead of cancelling it), select
the pause button.
• Moving forward:
To go to the next screen, select
the forward button
or
the next symbol at the bottom of the screen.
• Moving backward:
To go back to a previous screen, select a previous
symbol at the bottom of the screen.
User's Manual (3D Imaging)