Dalsa Linea SWIR GigE Series User Manual page 90

Device Streaming Registers
Start – End Command Requirements
Important: Every start command must have a corresponding end command. If not, the camera
can be in an unpredictable state. This pertains to DeviceRegistersStreamingStart,
DeviceRegistersStreamingEnd, DeviceFeaturePersistenceStart, and DeviceFeaturePersistenceEnd.
Device Registers
Streaming Start
Device Registers
Streaming End
Device Feature
Streaming Start
Device Feature
Streaming End
Register Check
Registers Valid
•
88 Operational Reference
DeviceRegistersStreamingStart
DeviceRegistersStreamingEnd
DeviceFeaturePersistenceStart
DeviceFeaturePersistenceEnd
DeviceRegistersCheck
DeviceRegistersValid
Announces the start of registers streaming without
immediate checking for consistency.
Announces end of registers streaming and performs
validation for registers consistency before activating
them.
Announces the start of feature streaming without
immediate checking for consistency.
Announces end of feature streaming and performs
validation for feature consistency before activating
them.
Performs an explicit register set validation for
consistency.
States if the current register set is valid and
consistent.
Linea SWIR GigE Series Camera
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible