Dalsa Linea SWIR GigE Series User Manual page 73

Display Name
Data Stream Selector
Stream1
Data Stream Type
Image
Image_MetaData
Pixel Format
Monochrome 8-Bit
Monochrome 12-Bit
Pixel Size
8 Bits/Pixel
12 Bits/Pixel
Horizontal Offset
Width
Height
Binning Selector
In Digital Domain
Binning Mode
Sum
Average
Binning Horizontal
Binning Vertical
Test Image Selector
Off
Linea SWIR GigE Series Camera
Feature & Values
dataStreamSelector
dataStreamType
Image_MetaData
PixelFormat
PixelSize
OffsetX
Width
Height
binningSelector
InDigitalDomain
binningMode
BinningHorizontal
BinningVertical
TestPattern
Description
Select which data stream to control (default is
Stream 1)
Stream1 Adjust parameters for Stream1
This feature is used to select or retrieve the
transfer protocol used to stream blocks.
Image The Image data blocks are streamed using
the payload type "Image".
The Image_MetaData blocks are streamed
using the payload type "Extended Chunk Data
with Image".
Contains all format information as provided
by PixelCoding, PixelSize, PixelColorFilter,
combined in one single value. Decimation
must be Off.
Mono8 Mono8: Monochrome 8-Bit.
Mono12 Mono12: Monochrome 12-Bit.
Total size in bits of an image pixel.
Bpp8 Bpp8: 8 bits per pixel.
Bpp12 Bpp12: 12 bits per pixel.
Horizontal offset from the Sensor Origin to
the Area Of Interest (in pixels).
Width of the Image provided by the device (in
pixels).
Height of the Image provided by the device
(in lines).
Select how the Horizontal and Vertical Binning
is done. The Binning function can occur in the
digital domain of a device or at the actual
sensor.
The Binning function can be done inside the
device but with a digital processing function.
Binning doesn't affect the current data rate
from the sensor or camera.
Sets the mode used to combine pixels
together when BinningHorizontal and/or
BinningVertical is greater than 1.
Sum The responses from the individual pixels are
added together, resulting in increased
sensitivity.
Average The responses from the individual pixels are
averaged, resulting in increased signal to
noise ratio.
Number of horizontal photo-sensitive cells to
combine together. This increases the intensity
of the pixels but reduces the horizontal
resolution.
Number of vertical photo-sensitive cells to
combine together. This increases the intensity
of the pixels but reduces the vertical
resolution of the image.
Selects the type of test image output by the
camera.
Off Image is from the camera sensor.
Version &
Operational Reference
Device
View
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Beginner
1.00
Guru
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Beginner
1.00
Beginner
1.00
Beginner
•
71