Dalsa Linea SWIR GigE Series User Manual page 35

Display Name
Device Scan Type
Linescan
Sensor Color Type
Monochrome Sensor
Sensor Width
Sensor Height
Input Pixel Size
12 BPP
Acquisition Line Rate
Exposure Mode
Timed
Trigger Width
Exposure Time
Exposure Delay
Sensor Gain Selector
Sensor
Digital
Gain
Black Level Selector
Analog
Black Level
Linea SWIR GigE Series Camera
Feature & Values
DeviceScanType
Linescan
sensorColorType
Monochrome
SensorWidth
SensorHeight
pixelSizeInput
Bpp12
AcquisitionLineRate
ExposureMode
Timed
TriggerWidth
ExposureTime
exposureDelay
Sensor Analog
SensorAnalog
DigitalAll
Gain
BlackLevelSelector
AnalogAll
BlackLevel
Description
Scan type of the sensor. < RO>
1D Linescan sensor.
Defines the camera sensor color type. < RO >
Sensor color type is monochrome.
Defines the sensor width in active pixels.
< RO>
Defines the sensor height in active lines.
< RO>
Size of the image input pixels, in bits per pixel.
< RO >
Sensor output data path is 12 bits per pixel.
Specifies the camera internal line rate, in Hz.
Sets the operation mode for the camera's
exposure.
The exposure duration time is set using the
Exposure Time feature and the exposure starts
with a LineStart event.
Uses the width of the trigger signal pulse to control
the exposure duration. Use the Trigger Activation
feature to set the polarity of the trigger. The
Trigger Width setting is applicable when the
LineStart trigger is enabled and a signal is selected
as trigger source.
Sets the exposure time (in microseconds) when the
Exposure Mode feature is set to Timed.
Specifies the delay in microseconds (µs) to apply
after the LineStart event before starting the
ExposureStart event.
Selects which gain is controlled when adjusting
gain features.
Apply an analog gain adjustment within the sensor
to the entire image. Conversion Efficiency table:
Gain = 4.0 is about 4.0 uV/e-; Gain = 3.0 -> 2.91
uV/e-; Gain = 2.0 -> 1.07 uV/e-; Gain = 1.0 ->
0.128 uV/e
Apply a digital gain adjustment to the entire image.
This independent gain factor is applied to the
image after the sensor.
Sets the selected gain as an amplification factor
applied to the image.
Selects which tap is controlled by the Black Level
feature.
Black level (offset) in DN.
Version
& View
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Operational Reference
Device
1.00
1.00
DFNC
1.00
Expert
1.00
Expert
1.00
Expert
DFNC
1.00
1.00
1.00
1.00
DFNC
1.00
1.00
1.00
1.00
1.00
Expert
•
33