Dalsa Linea SWIR GigE Series User Manual page 69

Cycling Preset Mode Control Feature Description
The following table describes these features along with the view attribute and device version. When
a Device Version number is indicated, it represents the camera software functional group, not a
firmware revision number. As Linea SWIR GigE capabilities evolve the device version will increase,
identifying the supported function package. New features for a major device version release will be
indicated by green text
The Description column will indicate which feature is a member of DALSA's Features Naming
Convention (denoted by DFNC), versus the GenICam Standard Features Naming Convention (SFNC
not shown).
Display Name
Cycling Preset Mode
Off
Active
Cycling Preset Count
Cycling Preset
Incremental Source
Start of Line
Start of Frame
Line 1
Line 2
Cycling Preset
Incremental Mode
Line
Frame
Cycling Preset Repeater
Cycling Preset Reset
Source
Start of Frame
Software
Cycling Preset Reset Cmd
Cycling Preset Current
Active Set
Features Activation
Selector
Exposure Time
Linea SWIR GigE Series Camera
for easy identification.
Feature & Values
cyclingPresetMode
cyclingPresetCount
cyclingPresetIncrementalSource
StartOfLine
StartOfFrame
cyclingPresetIncrementalMode
NextFrame
cyclingPresetRepeater
cyclingPresetResetSource
StartOfFrame
cyclingPresetResetCmd
cyclingPresetCurrentActiveSet
cP_FeaturesActivationSelector
ExposureTime
Description
Sets the Cycling Presets module mode.
Off Disable the Cycling Preset module.
Active Enable the Cycling Preset module.
Specifies the number of Presets to use.
Specifies the source that increments the
currently active cycling preset.
Increment on start of line event
Increment on start of frame event
Line1 Select Line 1 (and associated IO control block)
as cycling preset incremental source
Line2 Select Line 2 (and associated IO control block)
as cycling preset incremental source
Sets the synchronization point after a
increment trigger occur. This is use when the
increment source is an line, counter or timer.
NextLine The next set will take effect when the next
line acquisition will start.
The next set will take effect when the next
line acquisition will start.
Specifies the required number of cycling
preset increment events (generated by the
Cycling Preset Incremental Source) to
increment the index of the Cycling Preset
Current Active Set.
Specifies the source that resets the currently
active preset. On reset the current preset
index is set to 1.
Reset when a valid frame trigger occurs.
Software Use a software command as the reset source.
Reset the position of the preset cycling to 1
and the count to 0.
Returns the index of the currently active
cycling preset.
Selects the feature to control by the
cP_FeaturesActivationMode feature.
The cP_FeaturesActivationMode feature
controls the exposure time.
Device Version
& View
Operational Reference
V1.00
Expert
DFNC
V1.00
Expert
DFNC
V1.00
Expert
DFNC
V1.00
Expert
DFNC
V1.00
Expert
DFNC
V1.00
Expert
DFNC
V1.00
Guru
DFNC
V1.00
Guru
DFNC
V1.00
Expert
DFNC
•
67