Dalsa Linea SWIR GigE Series User Manual page 56

Flat Field Algorithm
Buffer Height
Flat Field Algorithm
Gain Max
Flat Field Algorithm
Gain Min
Flat Field Algorithm
Gain Divisor
Flat Field Algorithm
Gain Base
Flat Field Algorithm
Offset Max
Flat Field Algorithm
Offset Min
Flat Field Algorithm
Offset Factor
Defective Pixel Replacement
The Pixel Replacement algorithm is based on a predefined bad pixel map (as an XML file), either
factory supplied (file loaded as "Factory Map") or generated by the user (file uploaded as "User
Map 1"). The number of bad pixel entries is maximum 12. The following XML code sample forms
the template for the user to build bad pixel maps.
Note: Identifying bad pixels is the user's discretion. Teledyne DALSA technical support can provide
guidance.
Methods
There are two replacement algorithms available to the user.
Method 1: This algorithm replaces a defective pixel with the average value of the pixel to the
•
left and right of the pixel to be replaced.
Method 3: This algorithm replaces a defective pixel with a neighbor.
•
•
54 Operational Reference
flatfieldAlgorithmBufferHeight
flatfieldAlgorithmGainMax
flatfieldAlgorithmGainMin
flatfieldAlgorithmGainDivisor
flatfieldAlgorithmGainBase
flatfieldAlgorithmOffsetMax
flatfieldAlgorithmOffsetMin
flatfieldAlgorithmOffsetFactor
Flat Field Algorithm Buffer Height.
Flat Field Algorithm Gain Max.
Flat Field Algorithm Gain Min.
Flat Field Algorithm Gain Divisor.
Flat Field Algorithm Gain Base.
Flat Field Algorithm Offset Max.
Flat Field Algorithm Offset Min.
Flat Field Algorithm Offset Factor.
Linea SWIR GigE Series Camera
1.00
Invisible
DFNC
1.00
Invisible
DFNC
1.00
Invisible
DFNC
1.00
Invisible
DFNC
1.00
Invisible
DFNC
1.00
Invisible
DFNC
1.00
Invisible
DFNC
1.00
Invisible
DFNC