Dalsa Linea SWIR GigE Series User Manual page 86

Note: Increasing the Packet Resend Buffer allows more resend packets but it consumes internal
memory used for image transfers. This reduces the number of frames acquired at frame rates
exceeding the possible transfer rates. Memory size is monitored with the feature
"transferQueueMemorySize".
GigE Vision Host Control Category
GigE Vision Host controls group parameters used to configure the host computer system GigE
Vision features used for camera networking management. None of the parameters are stored in the
camera.
The features allow optimizing the network configuration for maximum bandwidth. Settings for the
parameters are highly dependent on the number of cameras connected to a NIC, the data rate of
each camera and the trigger modes used.
Teledyne DALSA's Network Imaging Module User manual provides information on these features.
•
84 Operational Reference Linea SWIR GigE Series Camera