Custom Settings - Digi 6350-SR User Manual

Initial setup

Custom settings

Option
Network
managed
configuration
Local
configuration
Digi 6350-SR/6355-SR LTE Router User Guide
Description
Digi 6350-SR/6355-SR routers will automatically synchronize with the aView cloud
management platform so long as it is able to establish a network connection. This
web-based configuration and monitoring portal provides:
Remote control and configuration updates
n
Email notifications for user-defined parameters (connection quality, data
n
usage, and so on)
Out-of-Band SMS recovery Real-time monitoring for:
n
Signal strength and quality
l
Network connectivity details
l
Location-based services
l
Device performance
l
Changes made within aView will be applied to the intended recipient(s) as soon as
those devices check in with the web service for synchronization. This occurs once
every 24 hours by default (though it can be rescheduled as necessary).
Note This assumes the router being configured has been registered with aView. To
apply all pending changes immediately, reboot the router or refer to the step-by-
step guidance for issuing remote commands.
If your Digi 6350-SR/6355-SR is not provisioned in aView, it will use a default local
configuration profile. Please refer to the Local Management section of this manual
to change settings for an Digi 6350-SR/6355-SR router without accessing aView.
Note Changes applied locally will be overridden should the device then sync with its
config from aView.

Custom settings

22