Digi 6350-SR User Manual page 30

Interface configuration
Setup
This example assumes the LAN ports are operating with default settings that provide DHCP
connectivity to devices connected to the Digi 6350-SR/6355-SR LAN ports.
To set up the VLAN, you need the following:
IP address range for the VLAN subnet.
n
LAN Ethernet port or SSID you want to separate onto the VLAN interface.
n
Sample
The following diagram shows a sample setup of a 6350-SR with LAN port 4 separated from the other
LAN ports and placed in a VLAN with ID #101.
VLAN 101 is configured to hand out IP addresses within the 192.168.101.100 - 192.168.101.250 range,
with a gateway IP of 192.168.101.1/24.
Sample configuration
Open the configuration profile for the 6350-SR and make the following changes.
Under Network -> Virtual LAN:
1. Create a new entry named test.
2. Select the desired LAN interface under the Device drop-down.
3. Type in the desired VLAN ID number in the ID field.
Under Network -> Interfaces:
Digi 6350-SR/6355-SR LTE Router User Guide
Configure LAN port as (VLAN)
30