Welcome
Device LEDs
Important information about upgrading to firmware version
20.2.x
Device defaults to Digi Remote Manager after configuration erase
With firmware version 20.2.x, the default cloud-based management service for the Digi 6350-SR/6355-
SR device is Digi Remote Manager.
Digi 6350-SR/6355-SR devices upgraded from a firmware version prior to 20.2.x to firmware version
20.2.x or greater will retain their central management configuration. Therefore, if the device was
previously configured to use aView for central management, it will continue to use aView after
upgrading to 20.2.x or greater.
However, if you erase the configuration of a device that was upgraded from a firmware version prior
to 20.2.x, it will default to using Digi Remote Manager for cloud-based central device management.
You must reset the cloud configuration to use aView after a configuration erase.
Reset the cloud-based management service to aView
To the cloud-based management service to aView:
Digi 6350-SR/6355-SR LTE Router User Guide
Device LEDs
11