Location Selection; Physical Setup - Digi 6350-SR User Manual

Initial setup

Location selection

Alongside existing infrastructure
When deploying the Digi 6350-SR/6355-SR alongside existing network equipment, in a telco closet for
instance, please consider the following (when possible):
Avoid metal enclosures.
n
Maximize distance from other equipment.
n
Mount the device on the most exterior wall.
n
Higher elevations are ideal.
n
New deployments
If there aren't any networking appliances currently installed at the deployment location, consider
mounting the cellular router close to a window for optimal reception (in addition to the
aforementioned list).
Note The Digi 6350-SR does not support Power over Ethernet (PoE). It MUST be located near an
electrical outlet.

Physical setup

There is a label on the bottom of the Digi 6350-SR/6355-SR that indicates the plug-in modem's IMEI
number.
(The modem is referred to as the Digi 1002-CM.)
Verify this IMEI number is an exact match to that on the plug-in modem itself, as well as the label on
the router's packaging.
Digi 6350-SR/6355-SR LTE Router User Guide

Location selection

16