Enabling Local Management And Logging In To Web Ui - Digi 6350-SR User Manual

Local device management

Enabling local management and logging in to web UI

Note Digi recommends you manage the Digi 6350-SR/6355-SR centrally using aView.
If you are not using the aView portal, you must manage and configure your device via the local
interface.
Connect to the router using its Gateway IP address: 192.168.210.1 by default.
Username: root
Password: default
Once logged in via the local web interface, click on the Configuration link. You will initially be shown a
limited set of configuration options. Start by enabling local management of the device.
1. Uncheck box next to Enable central management
2. (optional) If this is the first time the device has been configured, you will also need to update
the default user's password, under Users -> admin -> Password or Users -> root ->
Password.
3. Click Save.
After saving the profile, the device will no longer attempt to sync with aView and a full range of
available configuration options will be visible. Clicking the down arrow next to the name of a
configuration option will display a pop-up providing help details about that option, including any
default values.
The local management portal offers the same configuration options as aView, although changes made
here will not sync with the cloud.
Note Passwords are case sensitive. (The default credentials are all lower case.)
Digi 6350-SR/6355-SR LTE Router User Guide
Enabling local management and logging in to web UI
61