Using Terminal On Unit Link; Data Usage Estimates - Digi 6350-SR User Manual

Troubleshooting

Using Terminal on Unit link

Once the correct management IP is reported from the Digi 6350-SR/6355-SR to aView, click the
Terminal on Unit to open a page on aView that provides access to the Digi 6350-SR/6355-SR console.
Log in as a user that has admin access.
Note There is a known issue where the predictive/auto-correct feature of the Google keyboard
renders it incompatible with the Terminal page. If you access the above Terminal with an Android
phone or tablet, you will need to use a keyboard other than the native Google keyboard.

Data usage estimates

The Digi 6350-SR/6355-SR is sensitive to the data usage on a customer's wireless data plan. Careful
consideration was applied to add reporting, alerting, and remote control features through the best-of-
breed aView cloud management system. Please note that even though the service was designed with
standard reporting/ control intervals these values can be adjusted downward to obtain near-zero
data utilization or, conversely, remote services can be tuned up for more aggressive monitoring at the
expense of additional data utilization. The current aView architecture requires that all devices have a
minimum of 1 publicly reachable IP address to access cloud-based features (see below).
Note These values are estimates to be used for planning purposes—the actual carrier data
measurement may vary.
Data Consumption for aView Services
Service/function
Cloud-based Reporting/
Configuration
Digi 6350-SR/6355-SR LTE Router User Guide
Status/interval
Standard (every 30 min)

Using Terminal on Unit link

Usage Notes
3MB (per Includes one startup
month) sequence
58