Changing The Lan Subnet; Creating New Interfaces - Digi 6350-SR User Manual

Interface configuration

Changing the LAN subnet

The default subnet—192.168.2.x—is set in the IPv4 Address field of the LAN interface, and can be
adjusted to any range of private IPs by completing the following steps:
1. Expand the configuration page to Network > Interfaces.
2. Select the LAN interface that needs to be adjusted and expand its IPv4 entry.
3. The Address field contains the range of IPs available for assignment.
Note The subnet mask must also be specified.
Changes made to the IPv4 Address must also be updated in the DHCP server entry to preserve
functionality.

Creating new interfaces

Additional interfaces may be configured to further differentiate port functionality:
Digi 6350-SR/6355-SR LTE Router User Guide
Changing the LAN subnet
28