Vlan Management; Configure Lan Port As (Vlan) - Digi 6350-SR User Manual

Interface configuration
1. Expand the configuration page to Network > Interfaces.
2. Name the new Interface using the text field at the bottom of the list, clicking the Add button
to continue.
3. Ensure the appropriate settings are entered into the new collapsible section generated for the
interface:
The Enable checkbox must remain selected.
n
Interface Type will stay Ethernet.
n
The default Zone, "Any," suffices unless security policies necessitate a different
n
selection.
Device establishes which port(s) are assigned to the new interface.
n
Expand the IPv4 category to specify the Interface type and the desired address range.
n
Additional settings for DNS and DHCP configuration can be adjusted as necessary.
n
Refer to
n
Note This assumes a static (private) IP is desired for the interface.

VLAN management

Before creating a Virtual LAN route for the Digi 6350-SR/6355-SR, be sure that its corresponding LAN
interface has been configured (see
The interface's Device must be set to only include the port(s) that will be utilizing the VLAN
designation. Use the pull-down menu to specify an individual Ethernet LAN port, or choose the
"Bridge: LAN" option to assign all four ports.
Once the interface is created, it will be selectable as a Device in the VLAN's pulldown menu.
Separate VLANs by assigning each a unique ID number.
Note For guidance on how to create bridges with less than four ports, see
(VLAN).

Configure LAN port as (VLAN)

Goal
To set up a VLAN to separate network traffic on one LAN port from all other LAN interfaces.
Digi 6350-SR/6355-SR LTE Router User Guide
Failover for information on Connectivity Monitoring.
Creating new interfaces).
Configure LAN port as
VLAN management
29