Interface configuration
1. Create a new entry named vlan##, where ## is the number of the VLAN ID.
2. Select VLAN: test in the Device drop-down.
3. Type in the desired IP address and subnet in the Address field.
4. Under DHCP server , ensure the Enabled option is checked and the DHCP lease range
start and end values match the desired DHCP range.
Under Network -> Bridges -> LAN -> Devices:
Remove Ethernet: LAN4 from the LAN bridge.
n
Digi 6350-SR/6355-SR LTE Router User Guide
Configure LAN port as (VLAN)
31