Initial setup
Note
The plug-in modem must be installed before connecting the cellular antennas.
1. Affix the two WiFi antennas to the connectors situated closest to the power socket (Digi 6350-
SR only).
2. Connect the power supply to the corresponding 12V socket on the device's back panel.
3. Gather the two cellular antennas, activated SIM card (2FF), and plug-in modem. These will be
explained later.
Plug in LTE modem
1. Identify the SIM 1 and SIM 2 slots. If using only one SIM card, insert it into SIM 1. A second SIM
may be inserted into slot SIM 2 for an alternate wireless carrier.
2. With the antenna SMA connectors pointing outward, slide the Digi 1002-CM modem into the
router. A clicking sound will indicate it is properly inserted.
Digi 6350-SR/6355-SR LTE Router User Guide
Plug in LTE modem
17