Cardinal 210 Installation And Technical Manual page 38

SETUP AND CALIBRATION, CONT.
If WI110 is selected, the data will be transmitted in the following format:
<m><sp><s>xxxxx<sp><uu><cr><lf>
If number only is selected, the data will be transmitted in the following format:
xxxxxx<cr><lf>
If Toledo Short is selected, the data will be transmitted in the following format:
<stx><swa><swb><swc>xxxxxx<cr><sum>
Weight On Demand
If continuous output has not been selected for Serial Port 1 (Cont1=NO), the 210/215 indicator
will respond to a weight request (ENQ).
The host device (computer) sends:
ENQ - (hex 05)
The 210/215 will respond:
<s><xxxxxx><d><uu><m><cc><cr>
Where:
s = Sign
xxxxxx.xxx = Weight
d = Decimal point
uu = Units
m = Mode
cc = Weight Status
cr = Carriage Return
NOTE! The Weight On Demand function is not available for Serial Port 2.
Cont2= (Continuous Output Serial Port 2)
Press the ENTER key to show the current value. If the setting displayed is acceptable, press
the ENTER key again to save it. Otherwise, using the numeric keys, 0/NO or 1/YES, enter the
new setting and then press the ENTER key to save it.
Cont2= YES
Continuous Output
If Cont2= YES (Continuous Output) is selected, an additional prompt, tYPE= will be
displayed.
tyPE= (Continuous Output Format)
Press the ENTER key to show the current value. If the setting displayed is acceptable, press
the ENTER key again to save it. Otherwise, using the numeric keys enter the new setting,
then press the ENTER key to save it. Allowable values are:
0 = SMA
1 = SB-400
2 = SB-200
NOTE! See Continuous Output Serial Port 1, tyPE= for description of output formats.
8200-M411-O1 Rev D  210/215 Installation & Technical
34
"-" = negative, " " (blank) = positive
Six digits
Added to string if enabled in setup
tn, lb, l/o, oz, t, kg, g
G = Gross, N = Net
OC = overcap
CZ = center of zero
MO = motion
ee = weight not currently being displayed
(hex 0D)
Cont2= no
No Continuous Output
3 = Rice Lake IQ355
4 = AnDFV
5 = WI110
6 = Number
7 = Toledo Short
8 = SB500 with Traffic Light