Cardinal 210 Installation And Technical Manual page 18

ON/OFF KEY
This key performs two functions. Pressing it when the indicator is off will apply power to the
indicator. If the indicator is already on, pressing this key will turn the indicator off.
COUNT/SAMPLE KEY
This key performs two functions. The first time it is pressed, the indicator will count (unless
piece weight is 0). The second time it is pressed (or if
prompt ADD=5 on the display. Continued pressing of the COUNT/SAMPLE key will toggle
between the ADD=5, 10, 25, 50, 75 prompts to select a sample size. When desired sample
size is displayed, press the ENTER key OR with
numeric keypad, key-in any desired sample value, then press the ENTER key. Press the
ASTERISK key to abort the input operation. To exit the count function and display weight,
press the NET/GROSS key.
TIME/DATE KEY
This key is used to enter the clock mode to program the time, date and consecutive number.
Pressing the TIME/DATE key will enter the clock mode with the 210/215 displaying HoUr=.
12-Hour Format Selected In Setup (td=12)
1. With the display showing HoUr=, press the ENTER key.
2. If the time displayed is correct, press the ENTER key and proceed to step 4.
3. If the displayed time is incorrect, use the numeric keys to enter the correct time and
press the ENTER key.
4. The display will change to A=. Press the ENTER key.
5. The display will show YES.
• If the time is before noon (12:00 PM), press the ENTER key.
• If the time is after noon (12:00 PM), press the 0/NO key, then press the ENTER key.
6. The display will show dAtE=. Press the ENTER key.
7. If the date displayed is correct, press the ENTER key to proceed to the consecutive
number prompt, Cn.C .n=.
8. If the date displayed is incorrect, use the numeric keys to enter the correct date and
press the ENTER key to proceed to the consecutive number prompt. Remember to
enter the date in the same format (month-day-year or day-month-year) as selected by
the USA setup parameter. Note that with the USA=YES setting, the date format is
month-day-year.
24-Hour Format Selected In Setup (td=24)
1. With the display showing HoUr=, press the ENTER key.
2. If the time displayed is correct, press the ENTER key and proceed to step 4.
3. If the displayed time is incorrect, use the numeric keys to enter the correct time and
press the ENTER key. Note that with the 24-hour format selected, entering all times
after noon (12:00 PM), you must add 12 to the time, i.e. 3 PM would be 1500.
4. The display will show dAtE=. Press the ENTER key.
5. If the date displayed is correct, press the ENTER key to proceed to the consecutive
number prompt, Cn.C .n=.
6. If the date displayed is incorrect, use the numeric keys to enter the correct date and
press the ENTER key to proceed to the consecutive number prompt. Remember to
enter the date in the same format (month-day-year or day-month-year) as selected by
the USA setup parameter. Note that with the USA=YES setting, the date format is
month-day-year.
8200-M411-O1 Rev D  210/215 Installation & Technical
14
KEYPAD FUNCTIONS, CONT.
pct=0 on the first press) will show the
w
ADD= (5, 10 etc.) displayed, using the
X X