Recording Function; Customer-Specific Linearization; Approvals/Approval Marks - JUMO AQUIS touch P Installation Instructions Manual

18 Technical data
18.13.2

Recording function

a
Number of groups
Number of input variables
per group
Recording /
Memory rate
Memory values
Size of the ring buffer
d
History function
Archiving/evaluation
a
A freely configurable set of input variables can be pooled in one group.
Each group has its own display screen. The group affiliation is considered for data storage to enable eval-
uation via PC.
b
The measurement data are stored in a ring buffer. When the ring buffer is full, the recording function be-
gins at the start of the ring buffer by overwriting the measuring value history.
c
One entry contains 3 analog values and 3 binary values. The sum total of both groups is indicated.
d
The history function allows the user to scroll the diagram back in the recording time
period. All measured data stored in the ring buffer can thus be viewed on the
device.
18.13.3

Customer-specific linearization

Number of support points
b
Interpolation
c
Formula entry
a
Durch die Eingabe von Stützstellen (Wertepaare der kundensp. Kennlinie) kann eine genäherte
Kennlinie eingegeben werden.
b
Linear interpolation means forming a slope function from 2
support points.
c
As an alternative to entering support points, a customer-specific characteristic curve can
also be entered as a formula in the form of a polynomial.

18.14 Approvals/approval marks

Approval mark Testing agen-
cy
GL - hardware Germanischer
GL - software Lloyd
c UL us Underwriters
Laboratories
78
Data monitor
2
4× analog
3× binary
1 to 3600 sec.
Current value
Average value
Minimum value
Maximum value
b
sufficient for 150 entries
No
No
a
up to 40 value pairs
Linear
4th degree polynominal
Certificates/
inspection
numbers
Approval
submitted
E201387
Recording function (also avail-
able)
2
4× analog
3× binary
1 to 3600 sec.
Current value
Average value
Minimum value
Maximum value
c
sufficient for approx. 31 million
c
entries
Yes
Yes, (with JUMO PCA 3000 evalu-
ation software )
Inspection basis
Environmental Category C
EMC 1
UL 61010-1 (3. Edition),
CAN/CSA-C22.2 No.
61010-1 (3. Edition)
Valid for
Type 202580/...
Type 202580/...